Heat Press Tag Questions

Heat Press Tag FAQs!

Q: What temperature should we use when we are attaching the Thermal Heat Press Labels to garments?

A: We recommend starting at 325 degrees for about 10 seconds.  Adjust the time/temp as you see fit for the item you are tagging.  Also, ensure that you are using even pressure when applying the tags.
Pressure Knob.

----------------------------------------------------------------------------------

Q: Where should we attach the tags to garments?

A: Find a place that will be out of the way.  Example: the yoke of a jersey instead of the hem.

NOTE: If you have "stretchy" material, it's better to place the tag vertically instead of horizontally.  When fabric gets pulled/stretched it's typically done horizontally and could pull on the tags' adhesion.

----------------------------------------------------------------------------------

Q: How can I ensure even pressure while attaching the tags?

A: Ensure you are not placing a tag between seams, so that the head of the heat press machine can "meet" the fabric you are working with.   

Another item that may help is called a pressing pillow.  This is a non-stick, foam pillow that will allow even pressure distribution.  Here is a link to a variety of Amazon options.

NOTE: Your HPM usually comes with a shiny white, cover paper, typically known as a Teflon sheet.  These are Heat resistant Transfer protective sheets.  They can be used to cover the fabric that you are NOT attaching a tag to.